Special vessel heads are used by operators during maintenance of nuclear reactors. Even though they are temporary, they have to comply with very strict sealing criteria.
Packaging for medicines and surgical materials must be defect free. At Cetim we propose comprehensive and rigorous testing to insure packaging compliance.
Before they can be granted Certigaz ATG Sert certification, the press fittings used in domestic gas installations undergo many mechanical, chemical and leak tests.
Veolia adds another string to its bow and qualifies the leak tightness of the pipe fittings it uses on the pressure drinking water networks it manages.
This qualification relies on tests entrusted to Cetim teams.
EDF decided to assess the leak tightness performance of graphite seals on a series of thermocouples. A feasibility study was carried out, together with tests used to define technical criteria which meet the requirements of this application.
The company specialising in high-performance seals regularly calls on Cetim to characterise its raw materials and for specific assignments.
Do PTFE sealing braids retain their sealing performance once irradiated? Cycling tests carried out on an instrumented test bench specifically designed to meet EDF’s requirements gave an affirmative answer to this question.
While carrying out maintenance on the engines that power the Leclerc tanks, Wärtsilä detected cracks on the cast iron volutes of the turbine engines and asked Cetim to determine the root cause of this damage.
A comprehensive fault analysis carried out quickly and efficiently on a bridge enabled French temporary structures specialist Locapal to make the rights decisions without delay.
ECM Technologies, an industrial furnace manufacturer, asked Cetim to carry out a failure analysis to identify the cause of the leak that developed in the lower chamber of a vacuum furnace and to find solutions to prevent any recurrence.
Customer needs Reducing vehicle weight is now a major priority for automotive industry and one of the key mean of slowing fuel consumption. Customer benefits For a very reasonable cost, a good demonstration of feasibility study was concluded as a relevant prelude to industrialization Cetim answer This project was carried out on CETIM premises on…
Customer needs Assess the possibilities of using composite materials for automotive beam with its sector’s contraints Reduce the front beam’s weight by up to 25% Hold on all the mechanical features required by automotive standards Reach high-rate and low-cost production for composites parts Customer benefits A shared experience allowing to be at the leading edge…
Thanks to 50 years of experience, Cetim provides comprehensive multidisciplinary competencies to succeed your projets through global and dedicated support combining technological engineering and consulting, project engineering and financial engineering
The Cetim subsidiary now ranks as the leading European laboratory in terms of composite testing accreditations. With 42 Nadcap accreditations, it thereby strengthens the Cetim Testing range of services dedicated to recurrent measurements and tests, particularly for aeronautics. Etim, European champion of composite tests! By increasing the number of its Nadcap NMMT (Non-Metallic Materials Testing)-accredited …
Continue reading “Etim : Leading European laboratory for composite tests !”
Cetim was selected to manufacture five composite aircraft window frame demonstrators as part of the Sherloc European project. These parts and the first results will be displayed in an exclusive presentation during the JEC World2019 trade fair. First the car manufacturing sector and now the aeronautics sector! Within the SherlocEuropean project (Structural Health Monitoring, Manufacturing …
At the Digital Industry Summit, the automation giant and the Carnot label technological institute signed a partnership aiming to extend the industry of the future across manufacturing companies in mainland France. Cetim and Siemens France aim to boost the digital transformation throughout the country. The two organisations have reached a partnership agreement on the spreading …
Continue reading “Siemens and Cetim Join Forces to Boost the Digital Transformation of SMI”
Automated non-destructive testing for parts produced by Cetim was just one of the results of the “Tact” project dedicated to manufacturing composite parts for the aeronautical segment. The demonstrator will be on show at the JEC World 2019 fair. Cetim Sud-Ouest and Cetim decided to develop and automate Non-Destructive Testing (NDT) processes for composite parts …
Continue reading “Automated NDT for composite parts with Tact”
As part of the H2REF European project, the components of new-generation hydrogen distribution stations are being tested by Cetim in a burst test pit specifically adapted and instrumented for this purpose.
Reduce emissions, develop and integrate digital technologies to increase comfort and connectivity while reducing total cost of ownership and time to market
DISCHARGE This website is the property of Cetim (Centre technique des industries mécaniques) whose registered office is located 52, avenue Félix Louat, Senlis (60), France. The user acknowledges that he/she uses this information under his/her exclusive responsibility. The only obligation of Cetim is to provide due care concerning the information that Cetim makes available to …