You searched for - Page 2 of 3

MIDA and Cetim inks MOU to strengthen Malaysia’s manufacturing sector (…)

02/03/2021

MEDIA RELEASE : MIDA and Cetim inks MOU to strengthen Malaysia’s manufacturing sector towards advance engineering and technology in line with Malaysia’s investment aspirations. Kuala Lumpur, 22 February 2021 – The Malaysian Investment Development Authority (MIDA) is partnering with Cetim (the French leading Technical Centre for Mechanical Industry), through a Memorandum of Understanding (MOU) to encourage, …

Continue reading “MIDA and Cetim inks MOU to strengthen Malaysia’s manufacturing sector (…)”

French Mechanical Industry supports the Future European Aerospace Research towards Green Aviation

18/12/2020

Access the replay of our Webinar led during Aeromart #Digital2020“How French Mechanical Industry supports the Future European Aerospace Research towards Green Aviation ? “ Aeronautics must respond to 3 challenges – environmental, economic and societal – that require and justify an unprecedented R&T effort. This sector is strongly committed to the energy transition and the reduction of …

Continue reading “French Mechanical Industry supports the Future European Aerospace Research towards Green Aviation”

TechnipFMC and Cetim signed a technological collaboration agreement to strengthen composite technology development effort

17/11/2020

TechnipFMC and Cetim signed a technological collaboration agreement to support TechnipFMC ongoing effort to develop new generations of flexible composite pipes for the transport of hydrocarbons in deep water. These new generations of flexible pipe are leveraging the benefits of composite materials in terms of lightness, corrosion resistance and high mechanical performance, to meet the technical, …

Continue reading “TechnipFMC and Cetim signed a technological collaboration agreement to strengthen composite technology development effort”

French national grand prize for engineering: SEGULA Technologies’ REMORA project (offshore energy storage) rewarded

05/11/2020

As part of the French national engineering grand prize (GPNI – « Grand Prix National de l’Ingénierie »), the global engineering group SEGULA Technologies has just won the Industry and technology consulting prize for its REMORA project. A forward-looking solution for the development of renewable energies which enables energy to be stored under the sea …

Continue reading “French national grand prize for engineering: SEGULA Technologies’ REMORA project (offshore energy storage) rewarded”

Discover Cetim’s new vibrator in video!

04/11/2020

This seventh electrodynamic vibrator extends Cetim’s shock and vibration testing capabilities. Watch this video for a detailed description of its characteristics. Cetim’s new electrodynamic vibrator entered service in early September, and the least we can say is that it is an XXL model! As a matter of fact, it can withstand weights of 5 metric …

Continue reading “Discover Cetim’s new vibrator in video!”

Cetim Academy training web-discoveries and virtual classes available now in English !

07/09/2020

Following the success of the operation launched in May 2020, and to respond to the needs of International companies, Cetim Academy offers to take advantage of these new ways of learning in English. Like the French versions, the Web-discoveries in English are modules of 1H30 of exchanges with Cetim Industrial and training experts, to learn …

Continue reading “Cetim Academy training web-discoveries and virtual classes available now in English !”

Cetim Cobra: new version of the powerful solution for bolted & secured joint analysis

27/05/2020

The new version of Cetim Cobra, the world leader for bolted joint design and failure analysis has been released! This 6.4 version of the software developed by Cetim’s experts to design, dimension and optimise the behaviour of bolted joints features three major developments. Firstly, with a simple click on a threaded part, this update allows …

Continue reading “Cetim Cobra: new version of the powerful solution for bolted & secured joint analysis”

Cetim and Desktop Metal partner to accelerate the adoption of global Metal Additive Manufacturing

27/05/2020

Explore new advanced solutions for your manufacturing needs – from low-volume prototyping to mid-volume runs of complex metal parts ! Cetim, the Technical Centre for Mechanical Industry, and Desktop Metal, the company committed to making 3D printing accessible to manufacturers and engineers around the world, announced a partnership to accelerate the global adoption of metal …

Continue reading “Cetim and Desktop Metal partner to accelerate the adoption of global Metal Additive Manufacturing”

Next generation of aircraft generators : Palace, the European project, is unveiled !

24/04/2020

The aim of the Clean Sky project Palace is to develop a new pump architecture to equip the cooling systems of the next generation of aircraft generators. Find out more about this fascinating experience through a dedicated website page and a YouTube video. There is absolutely no doubt that the future generation of aircraft will …

Continue reading “Next generation of aircraft generators : Palace, the European project, is unveiled !”

Hydrogen distribution: the results of the H2REF project are unveiled!

01/04/2020

The partners of the European project intended to develop an H 2 distribution station based on an unprecedented concept have presented the first functional prototype which paves the way to commercial production. The new generation of hydrogen distribution stations developed in connection with the H2REF (Development of a cost effective and reliable hydrogen fuel cell vehicle refuelling …

Continue reading “Hydrogen distribution: the results of the H2REF project are unveiled!”

Continue to accompany you

21/03/2020

Despite the constraints imposed by the current health situation, Cetim stands true to its motto “Going for the Future” and has continued its operations. In response to the health crisis and the containment requirements, Cetim has put in place an organisation that fully complies with the Government directives. Within this context, an operational continuity and …

Continue reading “Continue to accompany you”

Cetim and KMTL pursue their strategic partnership with in-depth technical collaboration agreement for carbon fiber testing

12/02/2020

Following the maiden move and the signing of an exploratory agreement during JEC Asia 2017, Cetim, the French Technical Center of Mechanical Industries and the Japanese company KMTL (Kobe Material Testing Laboratory Co., Ltd), signed today, in conjunction with Singapore Airshow, a technical collaboration agreement, bringing the partnership to a new level. By joining forces …

Continue reading “Cetim and KMTL pursue their strategic partnership with in-depth technical collaboration agreement for carbon fiber testing”

Additive manufacturing: Exclusive Training Courses in Singapore. Register now !

27/01/2020

To accelerate Singapore aerospace companies to upgrade their additive manufacturing skills, especially with regards to inspection and post-processing, NAMIC, the National Additive Manufacturing cluster implemented a specific programme with Matcor, a Cetim Company, to enable knowledge transfer. Training Singapore aerospace companies in the implementation of essential technologies in additive manufacturing… Such is the mission entrusted …

Continue reading “Additive manufacturing: Exclusive Training Courses in Singapore. Register now !”

Cetim supports vehicle electrification!

12/11/2019

Many automakers have expanded their vehicle ranges to include electric and hybrid models and Cetim has invested in new equipment to meet the emerging needs of this sector. Indeed, Cetim now has a new test bench dedicated to vehicle electrification comprised of a modular battery simulator (current capacity: 105 kW), a charging electrospindle, a hydro-electric …

Continue reading “Cetim supports vehicle electrification!”

Smart machining on display at the EMO event with e-SPINDLE

27/08/2019

In Hanover, PCI SCEMM, Cetim and Arts et Métiers (AMVALOR) will be unveiling a brand new electrospindle capable of collecting information at the site of machining real time during the cutting process One technology… A world premiere! At the EMO trade fair 2019, from September 16-21, 2019, in Hanover (Germany), PCI SCEMM (stand Hall 12 …

Continue reading “Smart machining on display at the EMO event with e-SPINDLE”

Matcor becomes the official dealer for KISSsoft in the ASEAN area !

11/07/2019

KISSsoft is now available in 10 countries in the Asean area through a new distributor: Matcor! An agreement was signed in June between the Singaporean Cetim’s subsidiary and KISSsoft AG, the world’s leading provider of transmission system simulation software. This partnership allows both to penetrate a growing area in terms of R&D with a reputable …

Continue reading “Matcor becomes the official dealer for KISSsoft in the ASEAN area !”

GIFAS appointed Cetim as the Technologist of its Industry 4.0 Programme

05/07/2019

GIFAS (the French aerospace industries association) has just appointed Cetim as the technological expert of its 4.0 Programme aimed at supporting the transformation of the French aeronautical sector. Launched at the Paris-Le Bourget Air Show 2019, this programme is to accompany 300 very small, small and medium-sized enterprises coming together from all across France for …

Continue reading “GIFAS appointed Cetim as the Technologist of its Industry 4.0 Programme”

Laroche and Cetim strengthen their partnership in process engineering.

25/06/2019

Laroche and Cetim took a step closer to each other at the Paris-Le Bourget Air Show 2019. Two years after signing a MOU (Memorandum of Understanding), the engineering company and Cetim signed a contract on 18 June 2019 regarding a commercial partnership with the aim to collectively develop engineering services for the manufacturing industry over …

Continue reading “Laroche and Cetim strengthen their partnership in process engineering.”

Materials Testing: Safran will be relying on Cetim for another 5 years

12/06/2019

Safran has renewed its material testing partnership with Cetim! The engine manufacturer has just signed a new partnership contract with the Centre which means that, over the course of the next five years, Safran will entrust Cetim with the testing of the manufacturing of aeronautical parts made of metallic and composite materials. The signing of …

Continue reading “Materials Testing: Safran will be relying on Cetim for another 5 years”

Christophe Champenois appointed Managing Director of Etim

11/06/2019

At the first European Composite Testing laboratory with a number of Nadcap accreditations, Christophe Champenois leads the way. Etim, a laboratory specialised in production tests on composite materials, is now managed by a man who has dedicated his professional life to these materials. Christophe Champenois has just been appointed Managing Director of Etim, Cetim’s …

Continue reading “Christophe Champenois appointed Managing Director of Etim”