Aerospace, Automotive, Energy, Industry 4.0, Oil and Gas

Global Industrie 2022 : The leading exhibition for manufacturers in France

GI 2022

From 17 to 20 May 2022, Cetim will participate in a same booth with the Fédération des Industries Mécaniques at the Global Industrie 2022 exhibition. Global is a referent industrial event in France, with an international dimension, both a showcase for innovation and a platform for exchanges. A complete offer bringing together in one place the entire industrial ecosystem, the entire value chain and all the user sectors.

Come and discuss with our specialists about the challenges and opportunities of the industry of the future and the ecological and energy transition on our booth!


Cetim conferences:

Tuesday, May 17, 2022

11:15 AM to 12:00 PM – Keynote – Salle l, Measurement World

Microtomography and metrology
By Salma El Asmaï – Cetim

Wednesday, May 18, 2022

11:30 AM to 12:30 PM – Round tables meetings – Salle Barjavel, Hall 5

The digital twin, a massive industrialization weapon
The Digital Twin offers many possibilities to reinforce the performance of products, anticipate the stages of their life cycle or plan the activities of the production chain…

Round table discussion moderated by Jacques Pary with :

  • Raphaël Contamin, BIM Factory Director – Engie Maxima
  • Samir Assaf, digital expert, Cetim
  • Franck Bonassera, Axsys Industries Group
  • Sylvie Guinard, CEO, Thimonnier

15:00 PM to 15:30 PM – Keynote – Salle Barjavel, Hall 5

Scientific and technological challenges for the energy transition of the mechanical industry
By Pierre Chalandon, Operational Director, Cetim

16:30 PM to 17:30 PM – Round tables meetings – Salle Barjavel, Hall 5

Tomorrow, what disruptive technologies?
Traditional businesses are being challenged by newcomers. How should companies adapt? How can they break their habits and shatter glass ceilings?

Round table discussion moderated by Thierry Pigot, journalist with :

  • Philippe Lubineau, Director R&D Programs, Cetim Carnot
  • Manuel Collet, President, Ingénierie@Lyon
  • Gregorio Ameyugo, Head of Ambient Intelligence and Interactive Systems Division, CEA List

Thursday, May 19, 2022

10:15 AM to 11:15 AM – Round tables meetings – Salle Barjavel, Hall 5

The circular economy, from dream to reality
While the word environment is on everyone’s lips, a no-holds-barred review of this theme to discover manufacturers who have already made their revolution.

Round table discussion moderated by Jacques Pary with :

  • Muriel Maquennehan, Energy and Environmental Transition R&D Manager, Cetim
  • Pierre Georgealut, Packaging R&D Director, Lactalis

11:15 AM to 12:00 PM – Round tables meetings – Salle Barjavel, Hall 5

Diversification: an agile organization and methods to support your transformation
The latest crisis has highlighted the need for manufacturers to diversify more than ever, with the support of digitalization and production reorganization.

Round table discussion moderated by Jacques Pary with :

  • Julien Guillen, Additive manufacturing leader, Décathlon
  • Pierre-Marie Gaillot, Architect of the Transformation 4.0 of companies, Cetim

12:00 PM to 13:00 PM – Round tables meetings – Salle Barjavel, Hall 5

Energy, a major challenge for the industry of the future
The Covid and the war in Ukraine have had a heavy impact on the energy economy. What are the solutions to remain competitive in the future?

Round table discussion moderated by Jacques Pary with :

  • Landry Maillet, CEO of ABCM, who has made the circular economy one of his top priorities
  • Vincent Mahéo, President of ALSTOM Hydrogène SAS, who inaugurated the new hydrogen fuel cell production and assembly platform of its subsidiary Helion Hydrogen Power on December 10 in Aix-en-Provence, where it has invested 6 million euros
  • Benoît Miret, Director of the Vicat cement plant in Xeuilley
  • Eric Sénéchal, Energy Efficiency Technical Advisor , Cetim
  • A representative of Ademe

13:30 PM to 14:30 PM – Round tables meetings – Salle Barjavel, Hall 5

Collaborative robotics, how to optimize your choices?
Every day, new collaborative robots appear on the market, offering numerous functionalities, with advantages but also disadvantages. The lack of knowledge of the real contribution and constraints related to this complementary axis of robotics has led some to make choices of solutions, which have proved to be more or less distant from the initial objectives.

Round table discussion moderated by Thierry Pigot, journalist, with :

  • Gabriel Audry, automated facilities and control expert, Renault-Nissan-Mitsubishi
  • Renaud Champion – Co-founder of Robolution Capital
  • Alexandre Bailleul, Technical Business Manager, Cetim

Friday, May 19, 2022

10:30 AM to 11:00 AM – Keynote – Salle Barjavel, Hall 5

Additive Manufacturing
By Patrick Ebadi, Cetim

11:00 AM to 11:30 AM – Keynote – Salle Barjavel, Hall 5

The connected workshop in machining
By Anthony Boutillon, Cetim

11:30 AM to 12:00 AM – Keynote – Salle Barjavel, Hall 5

Development / improvement of composite implementation processes
By Laurent Juras, Cetim and François Dupont, TC IPC

=> Full program available on Global Industrie 2022

“Business Meetings with our Quatrium experts”

Exclu ! This will be an opportunity for Cetim to welcome you to a boarding area for the industry of the future during the 4 days of the show! With Quatrium, Cetim provides you with transformation experts, from support locations accessible via a network, to secure your industrial modernization investments. You will have access to many physical and digital technological means. You will be able to interact with experts capable of guiding you in understanding the technologies of a sustainable industry and directing you towards the best choice of solutions. You are wondering about the interest of an industry of the future approach, about the integration of an environmental transformation or quite simply you want to take a step back… do not hesitate and make an appointment here

Practical informations:

Booth n° 5C61, Hall 5, Univers SMART

Tuesday, Wednesday, Thursday: 9:00 am – 6:00 pm
Friday: 9:00 am – 5:00 pm

Paris Nord Villepinte
ZAC Paris Nord 2

For more informations, please contact :

Bruno Machet / +33 970 821 680